Alcohol Based Civilian Fuel

Alcohol Based Civilian Fuel can be produced from the reaction of raw materials (methanol or ethanol )with high-tech content additives and high-energy chemical products. This product is of high thermal efficiency and pollution-free. Tested by the relevant authority, its performance index are in line with national standards.

It is the next generation of environmental energy-saving fuel. Applicable to all types of large-scale catering canteens, furnace, boilers and some other industrial burner, Alcohol Based Civilian Fuel is the substitute of gas or diesel oil. It is easy to use, and can be keeped safely. Its storage is similar to that of diesel oil.

According to the probation of the product, users can save substantial costs compared with other fuels.

• Low price: The price of each MT of it is about 75% of that of diesel oil.
• Strong Firepower: Combustion value of gas for one kilogram is from 6000 to 7000 calories, and that of Alcohol Based Civilian Fuel is from 6300 to 7500 calories.
• Good Ignition: Include oxygen molecules, easy to ignite.
• No Smoke: Have no smoke & pollution from the start to the end of suing this fuel.
• No Odour: the main raw material is methanol, coupled with additives. So this fuel smells no odour.
• Not easy to explode: water can fight the fire caused by this liquid fuel.
• Save energy: Not be affeted by the international impact of crude oil, adequate raw materials come from China, so the price of Alcohol Based Civilian Fuel is stable.
• High environmental protection: Exhaust gas from using Alcohol Based Civilian Fuel is more environmental-protected than that from coalgas.

• Before using the fuel, professionals will guide to clean the remnant of the tank, in-vitta, and the mouth of stove so as to avoid the congestion and the influence of the effectiveness.
• After preparatory work, the meets & valve of the stove must be inspected, if safe, ignite.
• When igniting, open oil valve slowly, and then open the throttle to ignite, the flame size can be adjusted as needed.
• After the ceasefire, close the valve and the general valve to prevent oil spilling and fire.
• Other methods of operation can be used according to the use rules of the stove.
• If appearing the oil spill phenomenon, use water to rinse first, and then notify the Engineering Department.

• The fuel storage tanks (barrels) must be placed away from the fire source, so tanks (barrels) are all marked with obvious warning signs.
• The fuel is prohibited to add other fuels such as petrol, hydrocarbons and other products.
• It is prohibited to sect out the fuel with your mouth, and it is prohibited to clean parts.
• Avoid touching the fuel with the skin. If inadverten